Automotive

The 450ml can is very well thought out.. You can either spray directly through the spray head or through the spray tube. The spray pipe is mounted in this variant directly to the spray head and can be "activated" by a simple flap. The regulation of the amount can be controlled very well on the spray head. The fact that it is a penetrating oil, it penetrates through to deep point.
Two huge advantages through the spray tube:
1 One gets the oil well in unfavorable locations, locations.
2 Finally, you no longer like the little WD-40 cans to look after the spray tube. ;-)

I use WD-40, primarily for cleaning and corrosion protection for my entire tool (drill, pliers, screwdrivers, etc.). Simply spray the tool with a cloth and wipe clean finish. A thin film of the oil I always leave on the tool so that it is protected from rust etc.. But even if a pair of pliers times jammed, WD-40 on it and have it work again properly. Even rust can be removed with the oil super. Depending on how severe the rust, you have to bathe the object in WD-40 and let it soak for a while before it releases. Or when the door creaks times - WD-40 and it already is quiet again.


Conclusion:
The range of application of WD-40 is so large that it should have at home every. On the box is to use the following:
* Eliminates squeaks
* Displaces moisture
* Cleans and protects
* Loosens rusted parts
* Loosens seized mechanics

From me get the WD-40 spray with a 1-star or 5-star Amazon and unrestricted buy recommendation.